Heat Pump Cost in Arlington, Tennessee
In Arlington, a typical heat pump installation costs $3,689–$6,919 before rebates, based on local HVAC labor rates ($25/hr) and current equipment pricing.
Get Your Arlington Heat Pump Estimate
Where is your home?
We'll use your ZIP code to find local prices, rebates, and climate data.
Arlington Heat Pump Cost by Home Size
These estimates use the BLS median HVAC installer wage for the Arlington metro area ($25/hr), multiplied by standard crew-hours and shop overhead. Equipment pricing reflects ENERGY STAR certified heat pump retail data.
- 2T
- $3,548–$6,657
- 3T
- $3,689–$6,919
- 4T
- $3,807–$7,139
- 5T
- $4,382–$8,206
- Equipment
- $1,781–$3,307
- Labor
- $1,408–$2,112
- Materials
- $500–$1,500
- Arlington
- 11.9¢
- National
- 16.0¢
| Home Size | System Size | Equipment | Labor | Total Installed |
|---|---|---|---|---|
| Under 1,500 sq ft | 2 ton | $1,640–$3,045 | $1,408–$2,112 | $3,548–$6,657 |
| 1,500–2,500 sq ft | 3 ton | $1,781–$3,307 | $1,408–$2,112 | $3,689–$6,919 |
| 2,500–3,500 sq ft | 4 ton | $1,899–$3,527 | $1,408–$2,112 | $3,807–$7,139 |
| Over 3,500 sq ft | 5 ton | $2,474–$4,594 | $1,408–$2,112 | $4,382–$8,206 |
Labor reflects a 2-person crew for 8–12 hours at local shop rates. Materials and permits ($500–$1,500) are included in the total.
What Affects Heat Pump Cost in Arlington?
Local Labor Rates
Labor is the biggest variable between cities. The BLS reports a median HVAC installer wage of $25/hr in the Arlington metro area. After shop overhead (insurance, vehicles, permits), contractors typically bill $88/hr. A standard 2-person crew for 8–12 hours puts Arlington labor at $1,408–$2,112 for a typical install. That's near the national median of $28/hr.
System Size for Arlington Homes
In Climate Zone 3, cooling capacity is the primary sizing factor — hot summers drive the load calculation. A Arlington home under 1,500 sq ft typically needs a 2-ton system ($3,548–$6,657), while homes over 3,500 sq ft need 5 tons ($4,382–$8,206).
Efficiency & Your Electricity Rate
At Arlington's rate of 11.9¢/kWh (per EIA / Entergy Arkansas LLC), even standard-efficiency models are cheap to run. A basic 15 SEER2 system may be the best value unless you prioritize comfort features. The difference between a 15 SEER2 and 20 SEER2 system is roughly $204/year on heating alone for a mid-size home.
Arlington Heat Pump Rebates & Incentives
Incentive data sourced from the Rewiring America database. Programs and amounts change frequently — verify eligibility with your contractor or program administrator.
Federal 25C Tax Credit
Expired December 31, 2025. Previously offered up to $2,000 for qualifying heat pumps. Congress may extend or replace this credit — check IRS.gov for updates.
Arlington Electricity Rates & Operating Cost
Arlington residents served by Entergy Arkansas LLC pay approximately 11.9¢ per kWh for residential electricity, according to EIA and NREL/OpenEI data. The national average is approximately 16¢/kWh.
With below-average electricity costs, heat pumps are especially cost-effective to operate in Arlington. Even a standard-efficiency unit will deliver significant savings over gas or oil heating. A typical 3-ton heat pump in Arlington costs roughly $840–$1,120/year to heat a mid-size home (assuming COP 2.5 and 60–80 MMBtu annual heat load).
Arlington Climate & Heat Pump Performance
What is Climate Zone 3?
The IECC divides the US into 8 climate zones based on heating and cooling degree days. Zone 1 is the hottest (south Florida, Hawaii); Zone 8 is subarctic (interior Alaska). Shelby county falls in Zone 3. Zone 3 is a warm climate with distinct seasons — warm-to-hot summers and cool winters. Winter lows typically range from 15–30°F.
How Heat Pumps Perform in Zone 3
Heat pumps handle both seasons efficiently. Cooling is the larger load in most Zone 3 cities, but heating demand is meaningful. Standard heat pumps perform well without cold-climate ratings.
What We Recommend for Arlington
Balance SEER2 and HSPF2 when selecting a system. A 16+ SEER2, 9+ HSPF2 model covers both seasons cost-effectively.
Nearby Cities in Tennessee
Frequently Asked Questions
How much does a heat pump cost in Arlington?
Based on BLS HVAC labor data for the Arlington metro and ENERGY STAR equipment pricing, a typical 3-ton heat pump installation costs $3,689–$6,919. That breaks down to $1,781–$3,307 for equipment, $1,408–$2,112 for a 2-person installation crew, and $500–$1,500 for materials and permits. Smaller homes (2-ton) start around $3,548; larger homes (5-ton) can reach $8,206.
What rebates are available in Arlington?
The federal 25C tax credit (up to $2,000) expired December 31, 2025, but Congress may extend or replace it — check IRS.gov for updates. Check with your utility (Entergy Arkansas LLC) for local incentive programs.
What does electricity cost in Arlington?
According to EIA and NREL/OpenEI data, Arlington residents served by Entergy Arkansas LLC pay approximately 11.9¢ per kWh. This is below the national average, making heat pumps especially affordable to operate.
Do heat pumps work well in Arlington's climate?
Zone 3 is a warm climate with distinct seasons — warm-to-hot summers and cool winters. Winter lows typically range from 15–30°F. Heat pumps handle both seasons efficiently. Cooling is the larger load in most Zone 3 cities, but heating demand is meaningful. Standard heat pumps perform well without cold-climate ratings. Balance SEER2 and HSPF2 when selecting a system. A 16+ SEER2, 9+ HSPF2 model covers both seasons cost-effectively.
Where Our Data Comes From
- Labor rates:Bureau of Labor Statistics — Occupational Employment and Wage Statistics for HVAC Mechanics and Installers (SOC 49-9021), Arlington metro area.
- Equipment pricing: ENERGY STAR certified heat pump product data and retail pricing from leading online HVAC retailers.
- Electricity rates:U.S. Energy Information Administration (EIA) and NREL/OpenEI Utility Rate Database.
- Rebates:Rewiring America incentive database. Programs and amounts may change — verify with your contractor.
- Climate zones:IECC 2021 climate zone assignments by county.
Estimates reflect typical residential installations. Actual costs vary by contractor, site conditions, and system selection. Last updated March 2026.