Heat Pump Cost in Glenoma, Washington
In Glenoma, a typical heat pump installation costs $3,849–$7,159 before rebates, based on local HVAC labor rates ($28/hr) and current equipment pricing.
Get Your Glenoma Heat Pump Estimate
Where is your home?
We'll use your ZIP code to find local prices, rebates, and climate data.
Glenoma Heat Pump Cost by Home Size
These estimates use the BLS median HVAC installer wage for the Glenoma metro area ($28/hr), multiplied by standard crew-hours and shop overhead. Equipment pricing reflects ENERGY STAR certified heat pump retail data.
- 2T
- $3,708–$6,897
- 3T
- $3,849–$7,159
- 4T
- $3,967–$7,379
- 5T
- $4,542–$8,446
- Equipment
- $1,781–$3,307
- Labor
- $1,568–$2,352
- Materials
- $500–$1,500
- Glenoma
- 9.5¢
- National
- 16.0¢
| Home Size | System Size | Equipment | Labor | Total Installed |
|---|---|---|---|---|
| Under 1,500 sq ft | 2 ton | $1,640–$3,045 | $1,568–$2,352 | $3,708–$6,897 |
| 1,500–2,500 sq ft | 3 ton | $1,781–$3,307 | $1,568–$2,352 | $3,849–$7,159 |
| 2,500–3,500 sq ft | 4 ton | $1,899–$3,527 | $1,568–$2,352 | $3,967–$7,379 |
| Over 3,500 sq ft | 5 ton | $2,474–$4,594 | $1,568–$2,352 | $4,542–$8,446 |
Labor reflects a 2-person crew for 8–12 hours at local shop rates. Materials and permits ($500–$1,500) are included in the total.
What Affects Heat Pump Cost in Glenoma?
Local Labor Rates
Labor is the biggest variable between cities. The BLS reports a median HVAC installer wage of $28/hr in the Glenoma metro area. After shop overhead (insurance, vehicles, permits), contractors typically bill $98/hr. A standard 2-person crew for 8–12 hours puts Glenoma labor at $1,568–$2,352 for a typical install. That's near the national median of $28/hr.
System Size for Glenoma Homes
In Climate Zone 4, both heating and cooling demands are moderate, so sizing is balanced. A Glenoma home under 1,500 sq ft typically needs a 2-ton system ($3,708–$6,897), while homes over 3,500 sq ft need 5 tons ($4,542–$8,446).
Efficiency & Your Electricity Rate
At Glenoma's rate of 9.5¢/kWh (per EIA / PUD No 1 of Lewis County), even standard-efficiency models are cheap to run. A basic 15 SEER2 system may be the best value unless you prioritize comfort features. The difference between a 15 SEER2 and 20 SEER2 system is roughly $162/year on heating alone for a mid-size home.
Glenoma Heat Pump Rebates & Incentives
Incentive data sourced from the Rewiring America database. Programs and amounts change frequently — verify eligibility with your contractor or program administrator.
Federal 25C Tax Credit
Expired December 31, 2025. Previously offered up to $2,000 for qualifying heat pumps. Congress may extend or replace this credit — check IRS.gov for updates.
Glenoma Electricity Rates & Operating Cost
Glenoma residents served by PUD No 1 of Lewis County pay approximately 9.5¢ per kWh for residential electricity, according to EIA and NREL/OpenEI data. The national average is approximately 16¢/kWh.
With below-average electricity costs, heat pumps are especially cost-effective to operate in Glenoma. Even a standard-efficiency unit will deliver significant savings over gas or oil heating. A typical 3-ton heat pump in Glenoma costs roughly $667–$889/year to heat a mid-size home (assuming COP 2.5 and 60–80 MMBtu annual heat load).
Glenoma Climate & Heat Pump Performance
What is Climate Zone 4?
The IECC divides the US into 8 climate zones based on heating and cooling degree days. Zone 1 is the hottest (south Florida, Hawaii); Zone 8 is subarctic (interior Alaska). Lewis county falls in Zone 4. Zone 4 is a mixed climate — moderate summers and cold winters. Winter lows typically range from 10–25°F, with occasional single-digit nights.
How Heat Pumps Perform in Zone 4
Heating and cooling loads are roughly balanced. Heat pumps lose some capacity below 30°F but still outperform resistance heat. A well-sized standard heat pump works for most Zone 4 homes.
What We Recommend for Glenoma
Consider a cold-climate rated model if winter lows regularly drop below 15°F. Otherwise, a high-HSPF2 standard model (9.5+ HSPF2) is a good balance of cost and performance.
Nearby Cities in Washington
Frequently Asked Questions
How much does a heat pump cost in Glenoma?
Based on BLS HVAC labor data for the Glenoma metro and ENERGY STAR equipment pricing, a typical 3-ton heat pump installation costs $3,849–$7,159. That breaks down to $1,781–$3,307 for equipment, $1,568–$2,352 for a 2-person installation crew, and $500–$1,500 for materials and permits. Smaller homes (2-ton) start around $3,708; larger homes (5-ton) can reach $8,446.
What rebates are available in Glenoma?
The federal 25C tax credit (up to $2,000) expired December 31, 2025, but Congress may extend or replace it — check IRS.gov for updates. Check with your utility (PUD No 1 of Lewis County) for local incentive programs.
What does electricity cost in Glenoma?
According to EIA and NREL/OpenEI data, Glenoma residents served by PUD No 1 of Lewis County pay approximately 9.5¢ per kWh. This is below the national average, making heat pumps especially affordable to operate.
Do heat pumps work well in Glenoma's climate?
Zone 4 is a mixed climate — moderate summers and cold winters. Winter lows typically range from 10–25°F, with occasional single-digit nights. Heating and cooling loads are roughly balanced. Heat pumps lose some capacity below 30°F but still outperform resistance heat. A well-sized standard heat pump works for most Zone 4 homes. Consider a cold-climate rated model if winter lows regularly drop below 15°F. Otherwise, a high-HSPF2 standard model (9.5+ HSPF2) is a good balance of cost and performance.
Where Our Data Comes From
- Labor rates:Bureau of Labor Statistics — Occupational Employment and Wage Statistics for HVAC Mechanics and Installers (SOC 49-9021), Glenoma metro area.
- Equipment pricing: ENERGY STAR certified heat pump product data and retail pricing from leading online HVAC retailers.
- Electricity rates:U.S. Energy Information Administration (EIA) and NREL/OpenEI Utility Rate Database.
- Rebates:Rewiring America incentive database. Programs and amounts may change — verify with your contractor.
- Climate zones:IECC 2021 climate zone assignments by county.
Estimates reflect typical residential installations. Actual costs vary by contractor, site conditions, and system selection. Last updated March 2026.