Heat Pump Cost in Redfield, Kansas

In Redfield, a typical heat pump installation costs $3,849–$7,159 before rebates, based on local HVAC labor rates ($28/hr) and current equipment pricing.

Avg Cost: $3,849–$7,159
14.3¢/kWh
0 Rebates Available
Climate Zone 4
Evergy Kansas South, Inc

Get Your Redfield Heat Pump Estimate

1
2
3
4

Where is your home?

We'll use your ZIP code to find local prices, rebates, and climate data.

Looking up...

Redfield Heat Pump Cost by Home Size

These estimates use the BLS median HVAC installer wage for the Redfield metro area ($28/hr), multiplied by standard crew-hours and shop overhead. Equipment pricing reflects ENERGY STAR certified heat pump retail data.

Cost by size
2T
$3,708–$6,897
3T
$3,849–$7,159
4T
$3,967–$7,379
5T
$4,542–$8,446
3-ton cost split
Equipment
$1,781–$3,307
Labor
$1,568–$2,352
Materials
$500–$1,500
Electricity rate
Redfield
14.3¢
National
16.0¢
Home SizeSystem SizeEquipmentLaborTotal Installed
Under 1,500 sq ft2 ton$1,640–$3,045$1,568–$2,352$3,708–$6,897
1,500–2,500 sq ft3 ton$1,781–$3,307$1,568–$2,352$3,849–$7,159
2,500–3,500 sq ft4 ton$1,899–$3,527$1,568–$2,352$3,967–$7,379
Over 3,500 sq ft5 ton$2,474–$4,594$1,568–$2,352$4,542–$8,446

Labor reflects a 2-person crew for 8–12 hours at local shop rates. Materials and permits ($500–$1,500) are included in the total.

What Affects Heat Pump Cost in Redfield?

Local Labor Rates

Labor is the biggest variable between cities. The BLS reports a median HVAC installer wage of $28/hr in the Redfield metro area. After shop overhead (insurance, vehicles, permits), contractors typically bill $98/hr. A standard 2-person crew for 8–12 hours puts Redfield labor at $1,568–$2,352 for a typical install. That's near the national median of $28/hr.

System Size for Redfield Homes

In Climate Zone 4, both heating and cooling demands are moderate, so sizing is balanced. A Redfield home under 1,500 sq ft typically needs a 2-ton system ($3,708–$6,897), while homes over 3,500 sq ft need 5 tons ($4,542–$8,446).

Efficiency & Your Electricity Rate

At Redfield's rate of 14.3¢/kWh (per EIA / Evergy Kansas South, Inc), mid-efficiency models (16–18 SEER2) typically offer the best balance of upfront cost and operating savings. The difference between a 15 SEER2 and 20 SEER2 system is roughly $243/year on heating alone for a mid-size home.

Redfield Heat Pump Rebates & Incentives

Incentive data sourced from the Rewiring America database. Programs and amounts change frequently — verify eligibility with your contractor or program administrator.

Federal 25C Tax Credit

Expired December 31, 2025. Previously offered up to $2,000 for qualifying heat pumps. Congress may extend or replace this credit — check IRS.gov for updates.

Expired

Redfield Electricity Rates & Operating Cost

Redfield residents served by Evergy Kansas South, Inc pay approximately 14.3¢ per kWh for residential electricity, according to EIA and NREL/OpenEI data. The national average is approximately 16¢/kWh.

At this moderate rate, a mid-efficiency heat pump (16–18 SEER2) typically offers the best balance between upfront cost and long-term energy savings. A typical 3-ton heat pump in Redfield costs roughly $1,002–$1,336/year to heat a mid-size home (assuming COP 2.5 and 60–80 MMBtu annual heat load).

Redfield Climate & Heat Pump Performance

IECC Zone 4
Mixed-Humid

What is Climate Zone 4?

The IECC divides the US into 8 climate zones based on heating and cooling degree days. Zone 1 is the hottest (south Florida, Hawaii); Zone 8 is subarctic (interior Alaska). Bourbon county falls in Zone 4. Zone 4 is a mixed climate — moderate summers and cold winters. Winter lows typically range from 10–25°F, with occasional single-digit nights.

How Heat Pumps Perform in Zone 4

Heating and cooling loads are roughly balanced. Heat pumps lose some capacity below 30°F but still outperform resistance heat. A well-sized standard heat pump works for most Zone 4 homes.

What We Recommend for Redfield

Consider a cold-climate rated model if winter lows regularly drop below 15°F. Otherwise, a high-HSPF2 standard model (9.5+ HSPF2) is a good balance of cost and performance.

Nearby Cities in Kansas

Frequently Asked Questions

How much does a heat pump cost in Redfield?

Based on BLS HVAC labor data for the Redfield metro and ENERGY STAR equipment pricing, a typical 3-ton heat pump installation costs $3,849–$7,159. That breaks down to $1,781–$3,307 for equipment, $1,568–$2,352 for a 2-person installation crew, and $500–$1,500 for materials and permits. Smaller homes (2-ton) start around $3,708; larger homes (5-ton) can reach $8,446.

What rebates are available in Redfield?

The federal 25C tax credit (up to $2,000) expired December 31, 2025, but Congress may extend or replace it — check IRS.gov for updates. Check with your utility (Evergy Kansas South, Inc) for local incentive programs.

What does electricity cost in Redfield?

According to EIA and NREL/OpenEI data, Redfield residents served by Evergy Kansas South, Inc pay approximately 14.3¢ per kWh. This is near the national average of 16¢/kWh.

Do heat pumps work well in Redfield's climate?

Zone 4 is a mixed climate — moderate summers and cold winters. Winter lows typically range from 10–25°F, with occasional single-digit nights. Heating and cooling loads are roughly balanced. Heat pumps lose some capacity below 30°F but still outperform resistance heat. A well-sized standard heat pump works for most Zone 4 homes. Consider a cold-climate rated model if winter lows regularly drop below 15°F. Otherwise, a high-HSPF2 standard model (9.5+ HSPF2) is a good balance of cost and performance.

Where Our Data Comes From

Estimates reflect typical residential installations. Actual costs vary by contractor, site conditions, and system selection. Last updated March 2026.