Heat Pump Cost in Star City, Indiana

In Star City, a typical heat pump installation costs $3,849–$7,159 before rebates, based on local HVAC labor rates ($28/hr) and current equipment pricing.

Avg Cost: $3,849–$7,159
19.1¢/kWh
1 Rebate Available
Climate Zone 5
Northern Indiana Pub Serv Co

Get Your Star City Heat Pump Estimate

1
2
3
4

Where is your home?

We'll use your ZIP code to find local prices, rebates, and climate data.

Looking up...

Star City Heat Pump Cost by Home Size

These estimates use the BLS median HVAC installer wage for the Star City metro area ($28/hr), multiplied by standard crew-hours and shop overhead. Equipment pricing reflects ENERGY STAR certified heat pump retail data.

Cost by size
2T
$3,708–$6,897
3T
$3,849–$7,159
4T
$3,967–$7,379
5T
$4,542–$8,446
3-ton cost split
Equipment
$1,781–$3,307
Labor
$1,568–$2,352
Materials
$500–$1,500
Electricity rate
Star City
19.1¢
National
16.0¢
Home SizeSystem SizeEquipmentLaborTotal Installed
Under 1,500 sq ft2 ton$1,640–$3,045$1,568–$2,352$3,708–$6,897
1,500–2,500 sq ft3 ton$1,781–$3,307$1,568–$2,352$3,849–$7,159
2,500–3,500 sq ft4 ton$1,899–$3,527$1,568–$2,352$3,967–$7,379
Over 3,500 sq ft5 ton$2,474–$4,594$1,568–$2,352$4,542–$8,446

Labor reflects a 2-person crew for 8–12 hours at local shop rates. Materials and permits ($500–$1,500) are included in the total.

What Affects Heat Pump Cost in Star City?

Local Labor Rates

Labor is the biggest variable between cities. The BLS reports a median HVAC installer wage of $28/hr in the Star City metro area. After shop overhead (insurance, vehicles, permits), contractors typically bill $98/hr. A standard 2-person crew for 8–12 hours puts Star City labor at $1,568–$2,352 for a typical install. That's near the national median of $28/hr.

System Size for Star City Homes

In Climate Zone 5, heating capacity drives the sizing — the system must handle cold winters without supplemental heat. A Star City home under 1,500 sq ft typically needs a 2-ton system ($3,708–$6,897), while homes over 3,500 sq ft need 5 tons ($4,542–$8,446).

Efficiency & Your Electricity Rate

At Star City's rate of 19.1¢/kWh (per EIA / Northern Indiana Pub Serv Co), high-efficiency models (19+ SEER2) pay back their premium faster than average — consider variable-speed systems for the best return. The difference between a 15 SEER2 and 20 SEER2 system is roughly $326/year on heating alone for a mid-size home.

Cold Climate Requirements

Star City is in Climate Zone 5, where the NEEP cold climate database lists heat pumps certified to maintain rated heating capacity at 5°F and below. These models cost 10–20% more than standard units but avoid the need for backup electric resistance heat, which can cost 2–3x more to operate per EIA rates.

Star City Heat Pump Rebates & Incentives

Incentive data sourced from the Rewiring America database. Programs and amounts change frequently — verify eligibility with your contractor or program administrator.

Federal 25C Tax Credit

Expired December 31, 2025. Previously offered up to $2,000 for qualifying heat pumps. Congress may extend or replace this credit — check IRS.gov for updates.

Expired

Indiana Energy Saver Program

state · indianaenergysaver.com

50%

Indiana offers 1 state and utility incentive program for heat pump installations. View all Indiana incentives →

Star City Electricity Rates & Operating Cost

Star City residents served by Northern Indiana Pub Serv Co pay approximately 19.1¢ per kWh for residential electricity, according to EIA and NREL/OpenEI data. The national average is approximately 16¢/kWh.

At this above-average rate, investing in a higher-efficiency heat pump (18+ SEER2) makes strong financial sense — the energy savings will offset the higher equipment cost faster. A typical 3-ton heat pump in Star City costs roughly $1,343–$1,790/year to heat a mid-size home (assuming COP 2.5 and 60–80 MMBtu annual heat load).

Star City Climate & Heat Pump Performance

IECC Zone 5
Cold

What is Climate Zone 5?

The IECC divides the US into 8 climate zones based on heating and cooling degree days. Zone 1 is the hottest (south Florida, Hawaii); Zone 8 is subarctic (interior Alaska). Pulaski county falls in Zone 5. Zone 5 has cold winters with regular temperatures below 10°F and occasional drops below 0°F. Heating is the dominant energy load.

How Heat Pumps Perform in Zone 5

Standard heat pumps lose significant capacity below 15°F and may rely on expensive backup heat. Cold-climate models maintain 70–80% of rated capacity at 5°F.

What We Recommend for Star City

A NEEP-listed cold-climate heat pump is strongly recommended. Look for models rated to maintain capacity at 5°F with a COP above 2.0. This avoids reliance on electric resistance backup. The NEEP ASHP database is the industry standard for identifying cold-climate certified models.

Nearby Cities in Indiana

Frequently Asked Questions

How much does a heat pump cost in Star City?

Based on BLS HVAC labor data for the Star City metro and ENERGY STAR equipment pricing, a typical 3-ton heat pump installation costs $3,849–$7,159. That breaks down to $1,781–$3,307 for equipment, $1,568–$2,352 for a 2-person installation crew, and $500–$1,500 for materials and permits. Smaller homes (2-ton) start around $3,708; larger homes (5-ton) can reach $8,446.

What rebates are available in Star City?

The federal 25C tax credit (up to $2,000) expired December 31, 2025, but Congress may extend or replace it — check IRS.gov for updates. According to the Rewiring America incentive database, Indiana currently offers Indiana Energy Saver Program, with potential savings up to $0.

What does electricity cost in Star City?

According to EIA and NREL/OpenEI data, Star City residents served by Northern Indiana Pub Serv Co pay approximately 19.1¢ per kWh. This is above the national average of 16¢/kWh, making high-efficiency models a better investment.

Do I need a cold-climate heat pump in Star City?

Star City is in IECC Climate Zone 5, where winter temperatures regularly drop below freezing. The NEEP cold climate ASHP database lists heat pumps tested to maintain rated capacity at 5°F and below. These models cost 10–20% more but avoid expensive backup electric resistance heating. We recommend choosing a NEEP-listed model for any home in zones 5–8.

Where Our Data Comes From

Estimates reflect typical residential installations. Actual costs vary by contractor, site conditions, and system selection. Last updated March 2026.