How Much Does a Heat Pump Cost in Ellsworth?

$30/hr

Local HVAC Labor Rate

Labor is the biggest variable between cities. The Bureau of Labor Statistics reports that HVAC installers in the Ellsworth area earn a median of $30/hr. After business overhead (insurance, trucks, office), contractors typically charge around $104/hr. A typical install takes a 2-person crew 8–12 hours, putting Ellsworth labor at $1,248–$2,080. That's near the national median of $28/hr.

Source: BLS Occupational Employment Statistics, SOC 49-9021

Zone 5

Your Climate Zone

Ellsworth is in IECC Climate Zone 5. Zone 5 has cold winters with regular temps below 10°F. Heating dominates. Cold-climate models maintain 70–80% capacity at 5°F. This affects what size and type of system you need: since winters are harsh, your system needs enough heating power to keep up without backup electric heat.

A Ellsworth home under 1,500 sq ft typically needs a 2-ton system ($5,040–$9,164), while homes over 3,500 sq ft need 5 tons ($8,664–$14,996).

In Zone 5, NEEP-certified cold climate models are strongly recommended. These cost 10–20% more upfront but work efficiently down to -15°F, so you avoid expensive backup electric heat strips.

Source: IECC 2021 Climate Zone Map · NEEP Cold Climate Air Source Heat Pump List

15.8¢/kWh

Your Electricity Rate

This is what you pay per kilowatt-hour of electricity through Corn Belt Energy Corporation. It matters because a heat pump runs on electricity — so your electric rate directly affects how much it costs to heat and cool your home. Your rate is near average, so a mid-efficiency system (16–18 SEER2) usually offers the best balance of upfront cost and energy savings.

What's SEER2? It stands for Seasonal Energy Efficiency Ratio — think of it like MPG for your car. A 20 SEER2 system uses about 25% less electricity than a 15 SEER2 system. At Ellsworth's rate, that's roughly $269/year saved on heating alone.

Source: EIA Electric Power Monthly · Corn Belt Energy Corporation

How much does a heat pump cost in Ellsworth?

Based on 47 real homeowner quotes, the median installed cost in Illinois is $11,000. Budget installs (25th percentile) come in around $6,000, while premium systems hit $14,000+. The price depends on your home size, system type, and whether you need new ductwork.

What rebates are available in Ellsworth?

The federal 25C tax credit (up to $2,000) expired December 2025. No active state or utility programs found for this area.

Do heat pumps work in Ellsworth's climate?

Yes. Ellsworth is in Climate Zone 5. Zone 5 has cold winters with regular temps below 10°F. Heating dominates. Our recommendation: NEEP-listed cold-climate model with COP above 2.0 at 5°F.

What's the difference between ducted and ductless?

A ducted heat pump connects to the air vents already in your walls and ceiling — if you have a furnace now, you probably have ducts. It heats and cools the whole house through those vents. A ductless mini-split uses small wall-mounted units in individual rooms, connected by a thin pipe to an outdoor unit. It's ideal if you don't have existing ductwork, or want to control temperatures room-by-room. In Illinois: Ducted median $12,055 vs Ductless Mini-Split median $6,966.

What does electricity cost in Ellsworth?

15.8¢/kWh (Corn Belt Energy Corporation). That's near the national average of about 16¢. This rate directly affects your monthly operating cost since heat pumps run on electricity.

What brand should I get?

Based on what Illinois homeowners actually installed, the most popular brands are Trane (8 installs, median $13,500), Bosch (5 installs, median $13,236), Lennox (4 installs, median $8,225). Brand choice matters less than proper sizing and installation quality — a well-installed mid-tier system will outperform a poorly installed premium one.