Heat Pump Cost in Murray, Idaho
In Murray, a typical heat pump installation costs $3,849–$7,159 before rebates, based on local HVAC labor rates ($28/hr) and current equipment pricing.
Get Your Murray Heat Pump Estimate
Where is your home?
We'll use your ZIP code to find local prices, rebates, and climate data.
Murray Heat Pump Cost by Home Size
These estimates use the BLS median HVAC installer wage for the Murray metro area ($28/hr), multiplied by standard crew-hours and shop overhead. Equipment pricing reflects ENERGY STAR certified heat pump retail data.
- 2T
- $3,708–$6,897
- 3T
- $3,849–$7,159
- 4T
- $3,967–$7,379
- 5T
- $4,542–$8,446
- Equipment
- $1,781–$3,307
- Labor
- $1,568–$2,352
- Materials
- $500–$1,500
- Murray
- 11.8¢
- National
- 16.0¢
| Home Size | System Size | Equipment | Labor | Total Installed |
|---|---|---|---|---|
| Under 1,500 sq ft | 2 ton | $1,640–$3,045 | $1,568–$2,352 | $3,708–$6,897 |
| 1,500–2,500 sq ft | 3 ton | $1,781–$3,307 | $1,568–$2,352 | $3,849–$7,159 |
| 2,500–3,500 sq ft | 4 ton | $1,899–$3,527 | $1,568–$2,352 | $3,967–$7,379 |
| Over 3,500 sq ft | 5 ton | $2,474–$4,594 | $1,568–$2,352 | $4,542–$8,446 |
Labor reflects a 2-person crew for 8–12 hours at local shop rates. Materials and permits ($500–$1,500) are included in the total.
What Affects Heat Pump Cost in Murray?
Local Labor Rates
Labor is the biggest variable between cities. The BLS reports a median HVAC installer wage of $28/hr in the Murray metro area. After shop overhead (insurance, vehicles, permits), contractors typically bill $98/hr. A standard 2-person crew for 8–12 hours puts Murray labor at $1,568–$2,352 for a typical install. That's near the national median of $28/hr.
System Size for Murray Homes
In Climate Zone 5, heating capacity drives the sizing — the system must handle cold winters without supplemental heat. A Murray home under 1,500 sq ft typically needs a 2-ton system ($3,708–$6,897), while homes over 3,500 sq ft need 5 tons ($4,542–$8,446).
Efficiency & Your Electricity Rate
At Murray's rate of 11.8¢/kWh (per EIA), even standard-efficiency models are cheap to run. A basic 15 SEER2 system may be the best value unless you prioritize comfort features. The difference between a 15 SEER2 and 20 SEER2 system is roughly $202/year on heating alone for a mid-size home.
Cold Climate Requirements
Murray is in Climate Zone 5, where the NEEP cold climate database lists heat pumps certified to maintain rated heating capacity at 5°F and below. These models cost 10–20% more than standard units but avoid the need for backup electric resistance heat, which can cost 2–3x more to operate per EIA rates.
Murray Heat Pump Rebates & Incentives
Incentive data sourced from the Rewiring America database. Programs and amounts change frequently — verify eligibility with your contractor or program administrator.
Federal 25C Tax Credit
Expired December 31, 2025. Previously offered up to $2,000 for qualifying heat pumps. Congress may extend or replace this credit — check IRS.gov for updates.
Murray Electricity Rates & Operating Cost
Murray residents pay approximately 11.8¢ per kWh for residential electricity, according to EIA and NREL/OpenEI data. The national average is approximately 16¢/kWh.
With below-average electricity costs, heat pumps are especially cost-effective to operate in Murray. Even a standard-efficiency unit will deliver significant savings over gas or oil heating. A typical 3-ton heat pump in Murray costs roughly $831–$1,109/year to heat a mid-size home (assuming COP 2.5 and 60–80 MMBtu annual heat load).
Murray Climate & Heat Pump Performance
What is Climate Zone 5?
The IECC divides the US into 8 climate zones based on heating and cooling degree days. Zone 1 is the hottest (south Florida, Hawaii); Zone 8 is subarctic (interior Alaska). Shoshone county falls in Zone 5. Zone 5 has cold winters with regular temperatures below 10°F and occasional drops below 0°F. Heating is the dominant energy load.
How Heat Pumps Perform in Zone 5
Standard heat pumps lose significant capacity below 15°F and may rely on expensive backup heat. Cold-climate models maintain 70–80% of rated capacity at 5°F.
What We Recommend for Murray
A NEEP-listed cold-climate heat pump is strongly recommended. Look for models rated to maintain capacity at 5°F with a COP above 2.0. This avoids reliance on electric resistance backup. The NEEP ASHP database is the industry standard for identifying cold-climate certified models.
Nearby Cities in Idaho
Frequently Asked Questions
How much does a heat pump cost in Murray?
Based on BLS HVAC labor data for the Murray metro and ENERGY STAR equipment pricing, a typical 3-ton heat pump installation costs $3,849–$7,159. That breaks down to $1,781–$3,307 for equipment, $1,568–$2,352 for a 2-person installation crew, and $500–$1,500 for materials and permits. Smaller homes (2-ton) start around $3,708; larger homes (5-ton) can reach $8,446.
What rebates are available in Murray?
The federal 25C tax credit (up to $2,000) expired December 31, 2025, but Congress may extend or replace it — check IRS.gov for updates. Check with your utility for local incentive programs.
What does electricity cost in Murray?
According to EIA and NREL/OpenEI data, Murray residents pay approximately 11.8¢ per kWh. This is below the national average, making heat pumps especially affordable to operate.
Do I need a cold-climate heat pump in Murray?
Murray is in IECC Climate Zone 5, where winter temperatures regularly drop below freezing. The NEEP cold climate ASHP database lists heat pumps tested to maintain rated capacity at 5°F and below. These models cost 10–20% more but avoid expensive backup electric resistance heating. We recommend choosing a NEEP-listed model for any home in zones 5–8.
Where Our Data Comes From
- Labor rates:Bureau of Labor Statistics — Occupational Employment and Wage Statistics for HVAC Mechanics and Installers (SOC 49-9021), Murray metro area.
- Equipment pricing: ENERGY STAR certified heat pump product data and retail pricing from leading online HVAC retailers.
- Electricity rates:U.S. Energy Information Administration (EIA) and NREL/OpenEI Utility Rate Database.
- Rebates:Rewiring America incentive database. Programs and amounts may change — verify with your contractor.
- Climate zones:IECC 2021 climate zone assignments by county.
- Cold climate products:NEEP ASHP database — cold climate certified air source heat pumps.
Estimates reflect typical residential installations. Actual costs vary by contractor, site conditions, and system selection. Last updated March 2026.